Monday, October 17, 2011

Thermal Engineering Corporation - TEC Infrared Grill Burners Changed the World of Grilling

In the early 1980s a company known as TEC (Thermal Engineering Corp) invented and patented the infrared grill. But what's so special about IR grilling?

The infrared burner on an infrared grill focuses the flame of a traditional gas burner onto a ceramic tile. This tile is made up of thousands of microscopic holes and is able to transform the heat of the gas burner's flame into infrared radiant energy. Infrared heat is far higher in temperature and more direct than the usual grill, which works by convection heating. While convectional heat is conducted thought air while barbecuing, radiant heat grills directly at the grilling surface with direct heat.

Infrared Grill

Grilling reproduces the oldest cooking method in the world - an open fire. Whatever fuel is used to produce the flames of a natural fire, there is always a vast amount of infrared energy that is being created, in accordance with the science of physics. From physics we know that any given heat source emits light at some wavelength which is closest to that wavelength of the dominant energy production. To put it simply, the redder a flame the more infrared energy is being produced within it. Wood-burning flames are yellow-orange and coal flames are dull red. But, the gas-fired grill has a blue flame - there's not much infrared energy there at all, and this makes cooking meat thoroughly and efficiently a real problem.

A typical barbeque uses blue-flame burners that need a closed lid to trap air within the barbecuing area. That flames slowly heat the air trapped in the hood until the air is conducting enough heat to cook food. Most barbecues function very much like an oven that can be used outdoors.

Infrared grills also provide moisture retention. Convection heats by heating up the surrounding air and then just pushing that air onto the food. But look what happens when you use a hair dryer - hot air dries out your hair. Convection grills dry out your meats or whatever else you are barbecuing, letting the food's juices rise up and get carried off on the air as condensation or to drip off the food and flare-up. But infrared energy does the precise opposite: it actually drives moisture from the food's surface down deeper into the food, enhancing flavor as well as texture for simply a deeper pleasure in the eating experience.

When you use infrared grilling, you get the benefits of shorter grilling times, more convenient grilling, and so much versatility that you can confidently grill even in sub-zero temperatures. Grilling also becomes safer because at very high temperatures any drippings simply get vaporized. This even adds more all-natural flavor to the meat-in short, you don't have flare-ups - due to the infrared designed cooking grate's concave design. But infrared grilling should not be thought of as limited to meats, for just as with convection grilling you can grill anything including seafood, grilled vegetables and chicken. No matter what you're grilling, with infrared grilling technology you get the unsurpassed flavor-enhancement of the wood or charcoal grill merged seamlessly with the pinpoint control and consistency of gas-fired grilling convenience and all the while enjoying more succulent (and thus more nutrition-rich) foods.

Thermal Engineering Corporation, or TEC, introduced the very first infrared grill in 1961. Eventually, their research, development, and engineering prowess led to thirty issued or pending United States and foreign patents. By the 1980s, TEC Grills were making headway as commercial cooking equipment, since they were able to make grills that heated up faster as well as more evenly across cooking surfaces while at the very same time being more fuel-efficient. It was in 1980 that TEC put on the market the world's first under-fired infrared gas grill and this was when professional chefs and restaurateurs really began taking notice and using infrared grills, so that the technology became more widespread than ever before.

However, TEC's main patent on infrared grilling technology ran out in the year 2000-and patents run out to allow for innovation. One new infrared grill making competitor named Altima came up with swappable burner units enabling someone to use a standard burner, infrared burner, and a charcoal firebox all at the same time. Meanwhile, TEC saw two split-offs form from its former employees and management who had ideas of their own: Alfresco and Solaire.

The real objective of all TEC infrared grill making competitors is to create more user-friendly (and sometimes more cost-effective) grills, since the original TEC infrared grills were, of necessity, based more on getting the science and engineering of infrared grilling right than on considerations of customer comfort zones and end-user convenience. The infrared gas grill manufacturer competitors have had much success here.

Alfresco came up with their proprietary "SearZone", which is made up of an infrared burner sitting off to the side of a traditional gas burner. The idea here is that one can use the infrared burner for searing meats, then move the seared meat over to the traditional gas burner to finish the cooking, thereby saving on energy costs, saving on costs for their infrared unit, and theoretically enabling more controlled, refined final flavor of the meat. Alfresco designed and released the first 9 volt ignition module, vented fire box and internal rotisserie motor. However, Alfresco infrared - convection grills (hybrids) use briquettes to conduct heat on the non-infrared, convectional side of the barbeque. Briquettes must be cleaned or swapped often or the stainless below the ceramic briquettes will corrode quickly.

Meanwhile, Solaire has patented its own InfraVection concept intended to allow an easy, user-friendly transition for the grillmaster who doesn't want to leave his "comfort zone" of the traditional convection burner but who still would love to enjoy the benefits of infrared grilling. Just as with Alfresco's "SearZone" technology, the Solaire InfraVection design enables easy conversion from one burner type to another, once again offering the greatest possible control over the final flavor and texture of the food. Solaire also boasts that the convection portion of an InfraVection grill consists of an "efficient stainless steel double-lanced ported U-burner with stainless steel vaporizer plate" (and no briquettes). The valve design on the Solaire infrared and infravection grill models allow both easy removal & installation of infrared and blue-flame burners but also allow an infrared burner to be turned from a low position to a high position without losing its flame.

What this all means for you is that while TEC is still a great brand of infrared griller, you might want to check out other, more user-friendly brands, too, without fearing that you won't be able to get the TEC-developed benefits of the IR grill. But without question, for any grillmaster professional or amateur who can afford it, an infrared grill cannot be surpassed. More than once customers and guests have expressed surprise that the steaks we grill taste much better than the 0. grilled steaks from the best restaurants in town.

Thermal Engineering Corporation - TEC Infrared Grill Burners Changed the World of Grilling